Heater and heat exchanger in one unit

The AddAir heater/heat exchanger cuts heat consumption by 70 % compared to traditional heaters. AddAir is a genuine game changer in the industry.

Heating with AddAir
During the first weeks of production, the AddAir works much like conventional type of water carried heaters.

However, once the need for humidity control arises, the AddAir is fundamentally different and far more efficient.

Dehumidification with AddAir
In dehumidification mode, the roller door opens and the airflow changes from recirculation of room air (heating mode).

In dehumidification mode, fresh air is pulled from the outside, through the radiator, and into the barn.

The cooler outside air results in a significantly higher Δt (Δt = difference between temperature of air entering heater and temperature of liquid in the radiator element) and it is exactly this that makes the AddAir a genuine game changer.

The result is, when in dehumidification mode, the AddAir has a much higher heating capacity, and it provides ample, fresh, pre-heated and bone dry air to the shed.

An example: If outside humidity is 90% and the outside air temperature is 0°C then the air introduced to the house via the AddAir can easily be raised to 30°C. Consequently, the humidity of the air introduced to the room drops to only 12%!! This bone dry air absorbs moisture like a sponge from the house and thereby cuts heating cost by 70% compared to traditional heating systems.

 AddAir in short: 

•          No CO2 emissions in the poultry house
•          Significantly reduced humidity in the house
•          Optimal environment for the birds
•          Swing away front – easy to clean
•          Electrical consumption only 20% of other heat exchanger systems
•          Capacity: 8000 m³/hour

The motor for the AddAir is UL/ULc listed and can run on both 50Hz and 60Hz power grid.